You’re looking for a quick turn PCB manufacturer because you need those quick turn PCB specs done quickly and done well. Your prototype PCB costs you a decent amount of money to produce; that is no secret. And most of the expense can be found in the components, and not the fabrication of the board. If the board is not right, though, then your whole design is not right. That is going to cost you even more in the end.
For this reason, it is important to look for a quick turn PCB manufacturer who can offer standard as well as add-on manufacturing features for your board fabrication. Here is are some of the things you should be looking for.
It is good to find a manufacturer who can boast a less than 0.05% return rate on printed circuit board manufacturing and can offer a 100% guarantee on manufacturing defects. A company that can back up its production and does so with confidence is one you want in your corner. If you can’t count on them, who can you count on?
In addition to producing in a timely manner, optional engineering review to analyze and report on any issues that might arise with your design as it is submitted is very important. The construction of your printed circuit board by the quick turn PCB manufacturer of your choosing goes through several different phases before being complete.
The FR-4 glass epoxy is the main insulating substrate. It is upon this substrate that the vast majority of rigid PCBs are made. There is a thin layer of foil laminated to one and sometimes, depending on the design, both sides of an FR-4 panel. Complex circuit boards are made with multiple layers and these layers are made with circuitry interconnections of copper.
When it comes to printing the legend, there are three methods that accomplish the task. These methods–silk screen printing, liquid photo imaging, and ink jet printing–contain the component designators, switch settings, test points, and other aspects that make assembling, testing, and servicing of the circuit board go much more smoothly.
In quality construction, the laminates are produced by curing under pressure and temperature several layers of cloth or paper, depending on the design.
If you are looking for quick turn PCB manufacturer, make sure you choose the right one for you and, most importantly, for your design.
